• Phone: (812) 944-7803

EPDM Applications

More often than not, there is no primer required for our roofing coating when applied to EPDM to roof surfaces. Historically, we have found that you can spray or roll our material directly onto EPDM surfaces and obtain great adhesion.

Below are the products we recommend if you have an EPDM roof:

See full application instructions here.

We always recommend using a test kit prior to applying our material to ensure that it adheres to your surface.

Does my roof need a primer

Depending on the results of the adhesion test, you may be required to apply a primer before applying coating.

Primer over EPDM should be applied at a thickness of 1/3 gallon per 100 square feet.

Once you have performed adhesion tests and applied the proper primer, you will need coating.

100% silicone roof coating residential bucket

Coating over EPDM should be applied at a thickness of 2.0 gallons per 100 square feet, achieving a final thickness of 25 mils.